Common electrical safety issues and solutions during BSCI factory audits (I) Using flammable wood products in distribution boxes

Problem phenomenon: The distribution box uses flammable wood products.
Solution: Use non-flammable materials instead.
BSCI Terms:
      B.11.4 Electricity
      electricity
      a) Are electrical installations checked periodically?
      a) Are electrical installations inspected regularly?
      b) Are blank electrical contacts exposed?
      b) Are unused electrical contacts exposed?
      c) Are electrical installations properly fixed so that they cannot easily fall down?
      c) Are the electrical installations properly installed so that they cannot fall down easily?
      d) Are electrical cords correctly fixed or repaired with tape?
      d) Are electrical wires properly installed or patched with tape?
      e) Are encasements of electrical machinery, devices and attachments broken?
      e) Are the boxes containing electrical machinery, appliances and accessories damaged?
      f) Is there a danger that electrical installation will energize surrounding installation (eg fragile electrical cords close to metal)?
      f) Will the electrical installation pose a hazard to surrounding installations (e.g. easily damaged wires are in close proximity to metal objects)?
      g) Are high voltage signs properly installed where needed (eg main power point, main fuse box)?
      g) Are high voltage signs (e.g. main power socket, main fuse box) properly installed where necessary?
      h) Are workplaces obstructed by distribution lines (eg electrical cords lying on the floor causing employees to
trip over them, electrical cords on tables, poorly installed electrical cords creating a risk of strangulation)?
      h) Is the workplace obstructed by distribution wiring (e.g. wires on the floor where workers may trip, wires on desks, poorly installed wires which may pose a strangulation hazard)?
      i) Are power hubs, electrical control stations, fuse boxes lockable?
      i) Are electrical sockets, power control stations and fuse boxes lockable?
      j) Are the boxes made out of non flammable material?
      j) Are the boxes made of non-flammable materials?
      k) Are light fittings, switches, plugs etc. in good condition, not broken and don't cause danger (electrocution)
to employees (missing cover for switches and plugs)?
      k) Are the lighting equipment, switches and sockets in good condition and not damaged and will not pose any danger (such as electric shock) (due to loss of covers on switches and sockets)?
      l) Do employees working with electricity have adequate qualification?
      l) Are employees whose work involves electricity adequately qualified?