What should customers pay attention to when inspecting the factory?

What are the things that customers need to pay attention to during factory inspection ? Many factories think they have made preparations before the factory inspection, but often some problems that they did not notice appear during the factory inspection, which leads to the failure of the factory inspection, and the serious consequences of re-inspection or order cancellation. Therefore, in response to these situations, Chaowang's senior factory inspection consultant has summarized the relevant information on what customers need to pay attention to during factory inspection.

What are the things that customers need to pay attention to when inspecting the factory? Generally, there are the following things to pay attention to:

1. Employee training records (such as the use of flat cars/boilers/needle detectors and some special equipment, with date/training content/trainer/trainee signature.

2. There are reasonable escape route arrows on the ground in the factory

3. There are enough emergency lights in the factory

4. There are escape indicator lights at the entrance of each safety passage.

5. A concise escape route map should be hung in a conspicuous place in the factory and dormitory area, which should be clear and easy to understand. There should be one at the entrance and exit of each floor.

6. There should be a medical box containing first aid medicines and daily medicines in a conspicuous location in each area of ​​the workshop. The medical box cannot be locked.

7. Provide first aid training within the factory and keep records. It is best to attach photos.

8. The scissors/awls of all departments must be tied tightly to their posts with ropes.

9. Broken needles are handled properly in the factory and a record sheet of replacement of old/broken needles is prepared.

Use of labor protection supplies: Those who often handle toxic chemicals should wear gas masks (such as gun cleaning), those who are exposed to dust should wear masks, those who use electric shears should wear safety gloves, and employees in the washing department should wear aprons/water shoes and gloves, etc.

10. Fire drills must be recorded in detail (photos/dates).

11. The needle detector must be tested every hour and records must be kept.

12. Detailed records of broken gun needles/broken sewing needles. A needle sample used by the manufacturer should be made to check whether the broken parts are found after the needle is broken.

13. If any problem is found after needle inspection, record it (e.g. if a needle is broken, the clothes should be taken out and the treatment should be noted.)

14. The packaging department should hang a packaging board and attached material card so that all workers in the packaging department can understand what goods are being packaged and check them.

15. The workshop needs to hang a production version and auxiliary material card so that all workers can understand what goods are being produced and check them.

16. The switch of the needle detector should be covered with a lock.

17. A maintenance record card should be hung on each mechanical equipment, and each maintenance should be recorded and signed.

18. Detailed records of pest control are required.

19. Keep records of the daily entry and exit of hand-sewing needles.

20. All internal factory documents must have years.

The above content is only part of the matters in factory inspection, and it is also the matters that customers need to pay attention to during factory inspection. If you want to know more about the information about customer factory inspection, you can make detailed inquiries through online consultation on the website or by phone. We have seat experts who can answer your factory inspection questions for free.