Walmart factory inspection requirements for eyewash stations

Walmart factory inspection requirements for eyewash stations
The eyewash station should be installed near the source of danger. It is best to be able to reach the area of ​​the eyewash station quickly within 10 seconds. At the same time, it should be installed on the same horizontal plane as much as possible. It is best to be able to reach it in a straight line to avoid cross-level rescue.

There are eye-catching signs around the eyewash station. It is best to use Chinese and English bilingual signs and pictures to clearly tell the operators on the production site the location and purpose of the eyewash station.

When the eyewash is operating normally, each component should meet the requirements of ANSI Z358-1-2004 standard, and each nozzle can be used separately at the same time. In northern areas where ice may form in winter, it is necessary to add antifreeze devices or install antifreeze protection facilities next to the equipment.

After the installation of the various components of the eyewash station is completed, the following requirements should also be met: when the eyewash station is correctly connected to the water source and all valve switches are in the closed state, there should be no water leakage in the connected pipes.

When the operating switch of the eyewash station is fully open, all valves must remain normally open, except for human factors.

When all switches of the equipment are in full working order, the entire equipment shall meet the requirements of ANSI Z358-1-2004 standard.